idp SMART Series User Manual page 44

Color Sensor Calib: Set whether to use color panel recognition as the calibration value of
the sensor. .
"Disable" is set to the default value.
"Enable" is set to the Open Color Sensor Calibration value.
Open Color Sensor Calibration: Measure the value of the color sensor.
Cancel Only: This function is not used in this model.
Display CardEmpty: This function is not used in this model.
Color Registration: To align the Y, M, and C panels for the best print results.
Front Device: This function is not used in this model.
(4) Run Netadmin
NetAdmin is changing the network configuration of SMART printer which is installed WiFi network
module. It is for changing WiFi IP address and other related configuration.
⑥
④
③
①
1) Configuration of WiFi option
① Select Printer : Connect the SMART-21P printer via USB port and select the it in the device
list. Then, click 'connect' button.
⑤
②
Figure 61 Run NetAdmin
30