idp SMART Series User Manual page 47

③ Print: Print test with CSD file which is designed by SMART IDesigner program.
④ Batch Start: Repeat selected encoding test by "⑤ Encoding"
⑤ Encoding: Encode Magnetic Stripe, Contact Card, Contactless Card
⑥ Printer Status: Check printer status.
⑦ Message: Description of status by log.
(2) Select printer and control
When you execute CardPrinterTest, it will search connected printers by USB and Network
automatically and SMART-21P printer connected to USB has higher priority. Other printers could be
selected by pull-down menu. You can test all function with connected printer.
. Control is consisted by SBS(Step by Step), Move, Rotate, Etc. section and you can control
printer by each step.

SBS
SBS is to operate SMART-21 printer in SBS(Step-By-Step) mode which you can control
the printer using commands. In SBS mode, after printing data transmission, printing a card
will be run only by clicking "DoPrint". It is the main difference between NORMAL mode and
SBS mode. When you click "Start", SMART-21 is operated in SBS mode, and existing
spooled data will be eliminated. To exit SBS mode, click "Stop".

Card
Card is to bring a card into printer and eject a card. "In" is to move a card from card slot to
printer and "Out" is to move a card from printer to card slot.

Move
Move is to move a card to specific position in the inside of printer. "Print" is to move a card
to the printing position, and "Mag." is to the magnetic encoding position. "from In" is to
move a card from the card in sensor to where you define position, and "from Out" is to
move a card from the card out sensor to where you define position.

Rotate
33