Figure 45 Color density
Black Density: To set resin black density. In the picture, barcode is printed to express
density.
When density is too strong, barcode is printed too thick. When density is too weak,
barcode is too thin. Please adjust resin black density to express clear barcode. Please
refer to the following pictures.
Figure 46 Resin Black density
Overlay Density: To set overlay density. Please set it when overlay is printed on
surface regularly. If it is too strong, it is hazy and marks are appeared. If it is too weak,
overlay panel is not printed edge areas. You can check it with printed card under the
light.
25