idp SMART Series User Manual page 37

①
③
④
⑤
⑩
Figure 44 CardPrinterConfig – Card Printer Basic Setup
① To show connected printers
Device: You can select a printer using pull-down menu. "IDP SMART-21 Card Printer"
is a name of printer. "SMART" is printer ID, "USB001" is connected port. If you connect
the Network printer, please check the "Allow Network Printer" and select in the pull-
down menu.
② To set administrator password and user password.
Change Root PW: To set administrator (root) password. This password is used to
verify user authority for CardPrinterConfig and User Authentication. Also it is required
for User password management.
Change User PW: To set user password for User Authentication.
③ Click "Card Printer" tab.
⑥
⑦
⑧
(Please set password for security use.)
23
②
⑨