idp SMART Series User Manual page 45

'IDP XXXXXXXX' is the name of printer, 'SMART' is Printer ID, 'USB001' is the connected
port
② Login : The pop-up window when the 'Connect' button is clicked.
* Default ID / Password: admin / admin
Network : Set the Dynamic IP or Static IP.
Set the DHCP because WiFi module will be used
③ WiFi : Set the WiFi configuration
Check the WiFi(Option) box, and input the ID and password of the WiFi network to use the
printer
* The device to control the printer should use the same WiFi network.
④ WIFI IP : Set the Dynamic IP or Static IP of WiFi network.
To use the printer in the flexible environment, set it to DHCP.
⑤ SET Configuration: After setting it, click the button to save.
⑥ Confirm : After rebooting the printer, click the 'Refresh' button and check the Wifi Connection
is available.
⑦
Figure 62 Confirm the WiFi connection in the Net Admin
31