Notes To Installer - Honeywell Notifier INSPIRE E10 Installation Instructions Manual

Notes to Installer

Notes to Installer
RECOMMENDATION
The installer must follow the general requirements of local code of practice relating to fire detection and alarm
systems for buildings. The installer must also follow the relevant local wiring regulations.
PARTS FOR INSTALLATION LATER
To prevent the possibility of damage or dirt degrading the performance or appearance of the products, the
installation of second fix parts such as doors, modules and battery must be delayed until all major building work
in the area is complete. The installation of outstanding parts is usually carried out during system first power up
during commissioning.
FIXTURE AND FITTINGS
It is the installers responsibility to provide adequate fixtures and fittings for the type of construction surface onto
which a product is to be installed, whilst utilising the fixing points on the respective product. The mounting of the
panel to a solid flat brick wall is described in the user guide.
As for other types of walls mounting an aid to this decision, the weight and overall size of each full assembly
together with implications on cable entries and routing must be taken into consideration. All these procedures
assume that the cable, gland, steel box and other related accessories are provided by the installer.
AS FITTED DRAWINGS
The installer must acquire site specific information from the interested parties, for details on the location of
products for installation. The acquired information together with this guide and the relevant standards must be
used to assist the work.
22