Panel Installation; Mounting Height; Backbox Spacers - Honeywell Notifier INSPIRE E10 Installation Instructions Manual

Panel Installation

MOUNTING HEIGHT


The panel must be mounted on a wall
height of 1.7m above floor level
display is just above normal eye level. Ensure there is
adequate space to allow for opening the panel door to
the right.


Notifier INSPIRE E10/E15 Control Panels - Installation instructions

at a

, such that the
1.7 m


BACKBOX SPACERS

Ensure either the 8 mm or 14 mm keyhole spacers

and round hole spacers

the backbox , to offset it from the wall. Normally
the 8 mm spacers are used, but to permit cables to
run behind the backbox the 14mm spacers must
be used. Fit the 3 keyhole spacers at the top and
2/3 round hole spacers at the bottom (3rd middle
for E15) fixing points on the back of the backbox.


x 3
8 mm or 14 mm
x 2 (E10)

x 3 (E15)
8 mm or 14 mm

supplied are fitted to



31