Parts Of Notifier Inspire Panels - Honeywell Notifier INSPIRE E10 Installation Instructions Manual

Parts of Notifier INSPIRE Panels

Parts of Notifier INSPIRE Panels
The Notifier INSPIRE E10/E15 range of Control panels are modular design to make installation easier. Each panel
is supplied in the following parts: a back box enclosure, standard modules and a door assembly, plus spare parts
and the batteries are optional extra not supplied with the panel. .
Back box assembly
6-slots Module carrier(s) supplied fitted inside each back box as standard. A module carrier accommodates
†
removable terminal blocks for field wiring. It also has a termination module with cables to connect to the PSU
and for connecting to a required battery option. Additionally, the E15 panel has a Row Link module with cables
that links 2 x 6-way module carriers.
Modules are fitted to the module carrier during commissioning and power up stage. There are optional
†
modules available they include:
Dual Loop OPAL Module, FAT / FBF Module, FARE / FRE Module, Serial RS232 / RS485 Module, I/O Module
and ID²NET Module.
The Integral Power Supply Unit (PSU) is rated:
240W for a Notifier INSPIRE E10 Control panel range
480W for a Notifier INSPIRE E15 Control panel range
The PSU provides the power requirements of the panel and external system. All power is normally derived
from an external AC mains power source. When the mains power supply is not available, the standby batteries
automatically supply the power requirements for a limited period, this period being determined by the
requirements of the local fire standards.
Door assembly
The Door has a touch-screen display, push button controls and LED indicators, to provide system status
†
indication and messages with system control being accessible via Access level PIN codes.
26