Table of Contents
Advertisement
Preparation
WARNING
Please note that the HeatShift Kit MUST
be installed on this appliance!
Caution
Beware of sharp edges! Wear gloves!
Unpack the Appliance
1.
Remove the cardboard wrapping and the wood pal-
let from the appliance and discard.
DO NOT DISCARD THE PROTECTIVE CARTON
AROUND THE BARRIER SCREEN!
2.
Unpack any loose items from around the appliance.
3.
Verify that you have all the components required
for the installation, including:
- approved non combustible cement board;
- liners and fuel bed (in separate carton);
- barrier screen;
- venting components and accessories;
- HeatShift Kit;
- electrical components.
Remove Window Sill and Window
Remove window sill.
Lift the sill up to free the magnets underneath then pull
it straight out.
26
Window Sill & Window
Remove the window.
1. Hook the window handle to one of the spring-load-
ed window levers.
2. Pull the lever and unhook the window. Repeat with
the other lever.
3. Pull the top of the
window outward
and lift it up behind
the front panel to
disengage it from
its rail.
4. Once removed
from the bottom
rail, rotate the win-
dow pane outward
to take it out com-
pletely; set it aside
in a safe place to
avoid damage.
Advertisement
Table of Contents
