Table of Contents
Advertisement
Planning
WARNING
Ensure weight of wall above is
NOT carried by the appliance.
Combustible
material
allowed on
front wall
16-1/2"
(419 mm)
Non-combustible
material on
front wall
17"
(432 mm)
between
finished
materials
Combustible
material
allowed on
front wall
16
HeatShift plenum or duct plates framing
required (top, front or sides); see instructions
packed with HeatShift kit.
Framing—Extended
Steel framing. Ensure
suitably braced to support
weight of wall. Ensure
weight of wall above is
NOT carried by appliance.
Combustible material
allowed on rear wall if
framed forward up to
flanged opening.
Horizontal surfaces (hearth
& overhang) within this zone
MUST be constructed of
non-combustible material if
within 9" (229 mm) of
appliance perimeter.
Combustible construction
with plywood base below
appliance is okay.
Advertisement
Table of Contents
