Table of Contents
Advertisement
Power Spot 3 Q5
Main Menu Options
1. Built-in programs
With this menu, you can set the built-in programs.
01) Press the MODE button until the display shows one of the 11 built-in programs:
02) Press the UP/DOWN buttons to toggle between the programs.
03) The device will now run the desired built-in program.
04) When the display shows
05) Press the UP/DOWN buttons to toggle between the following 20 color programs:
06) The above programs correspond with their DMX counterparts.
Note: For more information about the available color options, see Channel 8 – Color, page 17.
07) Press the SETUP button again, to open the submenu.
08) Press the UP/DOWN buttons to adjust the strobe intensity. The adjustment range is between
09) Return to step 2 and choose one of the remaining built-in programs:
10) Press the SETUP button to open the menu.
11) Press the UP/DOWN buttons to adjust the run speed of the built-in programs. The adjustment range is
between
12) Press the SETUP button again, to proceed to the strobe settings.
13) Press the UP/DOWN buttons to adjust the strobe intensity. The adjustment range is between
2. Auto Mode
With this menu, you can run all the built-in programs in a sequence.
01) Press the MODE button until the display shows
02) The device will now run all the available built-in programs in a sequence. It is not possible to adjust
any settings in the Auto mode.
Ordercode: 42573
Built-in programs
Auto Mode
DMX-512 Mode
Master/Slave Mode
Sound-controlled Mode
Manual Mode (Static Color Mode)
, press the SETUP button to enter the menu.
, from low to high intensity.
, 01-99 (from slow to fast) and FL= full ON.
, from low to high intensity.
.
14
.
.
Advertisement
Table of Contents
