Main Menu Options; Built-In Programs; Auto Mode - SHOWTEC Power Spot 6 Q5 Manual

Power Spot 6 Q5

Main Menu Options

1. Built-in programs

01) Press the MODE button until the display shows one of the 11 built-in programs:
02) Press the UP/DOWN buttons to toggle between the programs.
03) The device will now run the desired built-in program.
04) When the display shows
05) Press the UP/DOWN buttons to toggle between the following color programs:
06) The above programs correspond with their DMX counterparts.
Note: For more information about the available color options, see Channel 8 - Color
be set between 1-22
07) Press the SETUP button again, to open the submenu.
08) Press the UP/DOWN buttons to adjust the strobe intensity. The adjustment range is between
09) Return to step 2 and choose one of the remaining built-in programs:
10) Press the SETUP button to open the menu.
11) Press the UP/DOWN buttons to adjust the run speed of the built-in programs. The adjustment range is
between
12) Press the SETUP button again, to proceed to the strobe settings.
13) Press the UP/DOWN buttons to adjust the strobe intensity. The adjustment range is between

2. Auto Mode

01) Press the MODE button until the display shows
02) The device will now run all the available built-in programs in a sequence. It is not possible to adjust
any settings in Auto Mode.
Ordercode: 42574
Built-in programs
Auto Mode
DMX-512 Mode
Master/Slave Mode
Sound-controlled Mode
Manual Mode (Static Color Mode)
, press the SETUP button to enter the menu.
, page 17.
, from slow to fast.
, from slow to full speed.
, from slow to fast.
.
14
.
CH7 must
.