Table of Contents
Advertisement
7. Product information
7.2 Permitted exhaust air systems
In accordance with DIN 18017-3, the
following exhaust air systems are permitted
for ER-UP-GH.
Exhaust air system
aeroduct fire
protection system
PAM-GLOBAL RML
cast ventilation
system
Ceiling penetration
seal system
System with fireproof
shaft
Air extraction system
without fire protection
*
ER-UP/GH can be used inside and outside
the shaft, connection duct made from
flexible aluminium duct, second room
connection made from
duct.
7.3 Possible combinations
The ER recess-mounted exhaust air systems
described here comprise a UP housing and a
fan insert with cover.
In the shell phase the ER-UP/GH housing
is installed, wired and provided with a plaster
protective cover.
If the second room connection kit ER-ZR is
used, the ER-UP/GH housings can also be
used for second room extraction.
WC seat ventilation at the same time as room
ventilation is possible using the second room
connection of the ER-UP/GH housings. The
Maico extraction socket ER-AS (Ø 70) should
be used for this purpose and a connection
established to the WC seat.
Final assembly is undertaken once the
plastering and paint work is complete.
10
ER-UP/GH
housing
no
no
Yes*
no
Yes*
flexible aluminium
For decentralised ventilation, an ER 60 E
or ER 100 E fan insert is placed in the UP/GH
housing, the exhaust air filter and cover are
fitted.
ER 100 E units are permitted for second
room air extraction. These can be combined
with the standard, EVZ or EG control models
chapter 12.1.1.
ER 60 units are not permitted for the
second room connection.
7.3.1 Recess-mounted housing ER-UP/GH
● Plastic housing without fire protection
equipment. Can be combined with ceiling
penetration seal.
● Suited to wall or ceiling installation, inside
or outside the exhaust air shaft.
● Permissible air outlet direction with wall
installation: upwards, to right or to left.
● Plastic exhaust socket with airstream-ope-
rated plastic shutter, maintenance-free.
● For connecting second room ventilation
with knockout points at bottom, on right
and left.
7.3.2 ER 60 E or ER 100 E fan insert
● Fan insert with cover and exhaust air filter
for installation in ER-UP/GH housing.
● Electrical plug connection for quick
installation in the ER-UP housing.
● Fan insert has snap-on attachment for
easy installation.
● Cover with exhaust air filter. Trouble-free
filter change without using tools.
● It is possible to rotate the cover by ± 5° to
compensate for housings which have been
fitted at an angle.
● Filter change without tools.
● For single room or second room air
extraction with one single fan.
Exception: H models are only permitted for
single room air extraction.
● H model: Barrier-free products, as the fan
switches itself on and off automatically.
Advertisement
Table of Contents
