Scsi Id Config; Scsi Parity - ADIC VLS AIT Installation And Operating Manual

Quantum vls ait: user guide

Table of Contents

If you wish to change the status of the keyboard beep, use the RIGHT

Kybd field. Use UP

or "N" to disable the beep. Press ENTER to make the changes effective or press ESC to

return to previous menu item.

SCSI ID Config

Lets you select the SCSI ID for drive A, drive B and the robotics on the VLS.

Use LEFT

or RIGHT

is the robotic unit (autochanger) on the VLS. Use UP

desired ID for that particular element. Press ENTER.

•

Lets you enable or disable the reporting of SCSI parity. Press ENTER to access this function.

Use UP

or DOWN

disable the reporting of parity check. Press ENTER to activate the change.

or DOWN

to select "Y" to enable a beep when you press a button

Note

to select the desired field. DA is Drive A, DB is Drive B and AC

Notes

to select "Y" to enable the reporting of parity check or "N" to

button to select the

and DOWN

to scroll to the

Equipment Description

Table of Contents