Diagnostics Menu - ADIC VLS AIT Installation And Operating Manual

Use LEFT
First cassette you wish the VLS to insert into the drive. "L" is the number of the Last cassette
you wish the VLS to insert into the drive.
The Loopback (LPBK) mode determines what happens when the last cassette has been filled.
If you select "Y" for "Lpbk" the designated first cassette will be loaded into the tape drive
after the last cassette has been filled and ejected. If you select "N" an error message will be
issued and the backup will stop.

Diagnostics Menu

The following functions are available under the Diagnostics Menu:
•
Error Counters
•
Operation Log
•
Serial Number
•
Position Magazine
•
Unload Medium
For information on these options, refer to Appendix B.
24
Equipment Description
or RIGHT
to select the item you wish to change. "F" is the number of the
Note
•
Event Counters
•
F/W Revision
•
Position Drive
•
Load Medium
•
Unload Drives