Table of Contents
Advertisement
Alarm Management
Click on the playback window to show the tool bar as shown in area ③; right click on the window to show the menu list. The tool bar and menu
list are introduced in the table below.
Button
Introduction of area ④:
You can check the record type as required for record playback; first you should click
the playback camera, then check the record type (
: analytics record; and finally click
the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
Click
to set the date; click
A tool bar will appear after moving the mouse to the record time scale. Click
timeline to 24 hours' ratio. Drag the timeline or slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or
bottom of the timeline. You can also click
bottom of the timeline. Drag the slider at the bottom of the time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block stands for manual record, red block stands for sensor
based record, yellow block stands for motion based record, blue block stands for schedule record and cyan block stands for intelligence record.
Click the record block to set the time and then the playback camera will play the record from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or click
Click
button in the window to pop up the export window. Select the device, export path and format and then click "Export" button to start
the backup.
Button
Click it to Go to the live view interface; see Chapter 5 Live View Introduction
for details.
Menu List
--
Move tool. Click it to move the tool bar anywhere.
Click it to enable audio. You can listen to the camera audio by
Enable Audio
enabling audio.
Snapshot
Click it to snap.
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live view interface.
Click
Zoom In
record. When the record is paused in forward playing mode, you
can click
view the next frame.
Click it to add tag. You can play back the record by searching the
Add Tag
added tag. Click it and then enter the tag name in the popup
window. Click "Add" to add tag.
Click it to switch the playback camera. Click it and then check the
Switch Camera
camera in the popup window. Click "OK" to change the camera.
Close Camera
Click it to close the playback camera.
: manual record;
in the playback window to add camera for playback (the record time scale will show the record data of
to set the time and then the playback camera will play the record from the time you set.
to show the hidden time on the top of the timeline or click
Meaning
Meaning
to pause the record playing; click
to view the previous frame and click
on the tool bar at the bottom of the interface to clear all
: sensor based record;
: motion based record;
/
to zoom the timeline; click
45
DVR User Manual
to play the
to
: schedule record;
to recover the
to show the hidden time on the
to pop up an export information window.
Advertisement
Table of Contents
