Speco H16HRL User Manual page 9

Introduction
Alarm Management

Supports alarm schedule setting

Supports enabling or disabling of the motion detection, external sensor alarm input, intelligence alarm and exception alarms including IP
address conflict alarm, disk IO error alarm, disk full alarm, no disk alarm, illegal access alarm, network disconnection alarm, IPC offline alarm and so
on, alarm trigger configuration supportable

Supports IPC offline alarm trigger configuration of PTZ, snapshot, pop-up video, etc.

Supports event notification modes of alarm-out, pop-up video, pop-up message box, buzzer, e-mail and so on

The captured images can be attached into the e-mail when alarm linkage is triggered

Supports alarm status view of alarm-in, alarm-out, motion detection and exception alarm

Supports alarm to be triggered and cleared manually

Supports system auto reboot when exception happens
Network Functions

Supports TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol and so on

Supports allow and block list function and the allow and block IP address/IP segment address can be set

Supports multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only for the versions lower than 45) and Safari in MAC
system

Supports remote achievement, configuration, import and export of the DVR parameters and other system maintenance operations including
remote upgrading and system restart

Supports remote camera configuration of the DVR including video parameters, image quality and so on

Supports remote search, playback and export of the DVR

Supports manual alarm to be triggered and cleared remotely

The motorized zoom camera can be adjusted through web client (Supports zoom in/out, but one key focus is not currently supported)

Supports NAT function and QR Code scanning by mobile phone and Tablet

Supports mobile surveillance by phones or Tablets with iOS or Android OS

If one camera recording is enabled or disabled manually through web client, it will be simultaneously enabled or disabled in the DVR
Other Functions

The DVR can be controlled and operated by the buttons on the front panel, the remote controller and the mouse

Setting interfaces can be switched to one another conveniently by clicking the main menus on the top of the setting interfaces

Supports DVR information viewing including basic, camera status, alarm status, record status, network status, disk and export status

Supports factory restoring, import and export of the system configuration, log view and export and local upgrading by USB mobile device

Supports auto recognition of the displayer's resolution

You can click the right mouse button at any interface to go back to the upper interface

You can click the mouse wheel at any interface to go to the live view interface

The display language and video format of the DVR will not be changed and the system logs will be reserved if you reset the DVR to factory
default

Press and hold the right mouse button for 5 seconds in any interface to switch the output to VGA and the DVR will display the video at the
lowest resolution which the DVR supports
3
DVR User Manual