Table of Contents
Advertisement
Live View Introduction
Quickly Add
Check the cameras and then click "Add" to add cameras. Click
"Default Password" to set the default username and password of each camera.
Add Manually
Enter the IP address or domain name (click
the IPC in the window and then click "OK" button), port, username and password of the camera and then select the protocol. Click "Test" to test
the effectiveness of the input information and then click "Add" button (you can input one camera's information or above such as IP address,
username and password before clicking "Add" button). Click
password of each camera.
4.2.2 Edit Camera
Click "Edit Camera" in the setup panel to go to the interface as shown below. Click
Click
to edit the camera (see Add camera in 3.1 Startup Wizard for details). Click
to edit the camera's IP address, username and password and so on. Click
in the IP address column to pop up the domain name input window, enter the domain name of
to delete the camera. Click "Default Password" to set the default username and
18
to view the live image of the camera in the popup window.
to delete the camera. Click
DVR User Manual
in the "Operation"
Advertisement
Table of Contents
