EZ Setup & Main Interface
④ Add Camera. To add cameras from the LAN, make sure all cameras are set to DHCP. Click "Refresh" to refresh the list of online IP cameras
which are in the same local network with DVR and then click
Click
to delete the added camera. Click "Delete All" to delete all the added cameras.
Click
to edit the searched IP camera as shown on the below left. Enter the new IP address, subnet mask, gateway, username and the
password of the camera. You can check "Sync to IPC" to modify the IP address of the IPC via different network segments for being in the same
network segment with the DVR. Click "OK" to save the settings.
Click
to edit the added camera as shown on the above right. Enter the new camera name, IP address, port, username and the password of
to add the searched camera. Click "Add All" to add all the cameras in the list.
11
DVR User Manual