Table of Contents
Advertisement
Available languages
Available languages
2. Install the appliance in the installation opening.
WARNING! The power cable and the hoses must not be kinked or
bent when installing the appliance in the installation opening.
3. The free space between the top of the appliance and the worktop must be less
than 5 mm; see also chapter 2.10 P
4. The door of the appliance must be aligned with the adjacent cupboard doors.
2.10 Proper levelling
The appliance must stand in a stable and level position to ensure proper
operation. The supporting feet must stand firmly on the ground so that the
appliance does not wobble. Adjust the supporting feet accordingly. The firm
contact of the supporting feet with the ground also ensures that the appliance
does not vibrate or move unintentionally.
The dishwasher must also be levelled horizontally so that the dish racks operate
properly and the cleaning efficiency is guaranteed.
The maximum permissible inclination angle under the entire appliance is 2°.
Adjust the appliance with its supporting feet horizontally. Check with a spirit
level.
2.11 Installation of the free standing
1. Type 1: Fitting between existing cabinets.
The height of the dishwasher, 845 mm, has been designed in order to allow the
machine to be fitted between existing cabinets of the same height in modern
fitted kitchens. The feet can be adjusted so that correct height is reached. (s. fig.
below).
ROPER LEVELLING
~
~
92
.
Advertisement
Table of Contents
