Table of Contents
Advertisement
Available languages
Available languages
If any malfunction occurs, the grounding will reduce the risk of electric shock as
the electrical flow will prefer the way of 'least resistance.
The appliance must be properly grounded before initial operation. If you are in
doubt that the appliance is grounded properly, a qualified professional should
check the status of the electrical installation (not covered by the guarantee).
2.9 Installation of the appliance
The back of the appliance must face the wall. The appliance must be equipped
with an inlet and outlet hose, which can be installed on the left or right.
The appliance must be installed near an existing water inlet and outlet and near a
safety socket.
H
OW TO INSTALL THE APPLIANCE IN THE INSTALLATION OPENING
1. Prepare an installation opening according to the figure below.
Depending on where your safety socket is located, you may need to cut a hole in
one side of the cabinet.
1
2
3
4
33
Depending on model.
Distance between cabinet bottom and floor = 100 mm
For the Connections for power cord, water inlet, water outlet:
820 mm
min. 580 mm
80 mm
~
~
91
33
Advertisement
Table of Contents
