Pkm GSP12-6ES Instruction Manual page 102

Hide thumbs Also See for GSP12-6ES:
Table of Contents

Advertisement

Available languages

Available languages

 It is required to set the proper amount of the water softener based on the water
hardness range to optimise and customise the water softener consumption.
 You can set the consumption of water softener from H 1 to H 6. Water softener
is not required when the value H 1 is set.
Six water softener consumption levels can be selected. The water softener
consumption level should always be set according to the water hardness of
your region. We recommend setting the level relevant to the table of the water
hardness range above (s. chapter 4.1.2 W
SOFTENER CONSUMPTION
You need to get the information on the local water hardness range. You can
receive all relevant information from your local water supplier.
S
TEP
1. Switch on the appliance using the « O
THE CONTROL PANEL
2. Within 60 seconds after you have switched on the appliance, press and hold the
« P
ROGRAMME
3. The appliance is now in water softener setting-mode.
4. The display indicates the current status of the water softener consumption: e.g.
water softener level « H 3 » (s. table below).
S
2:
TEP
1. To select the proper water softener consumption setting according to your local
requirements, press the « P
water softener level (H 1 - H 6) is indicated on the display (s. table below).
2. Each press of the « P
one level. The settings are consecutive: H 1 → H 2 → H 3 → H 4 → H 5 → H 6 →
H 1 (s. table below).
Water softener (= dishwasher salt) is added to a running programme by the
appliance automatically. When and how much water softener the appliance adds
to a running programme depends on the individually set water softener level
(H 1 - H 6); s. relevant table in chapter 4.1.2 W
SOFTENER CONSUMPTION
).
1:
ENTER WATER SOFTENER SETTING MODE
:
OPERATING BUTTONS AND INDICATORS
» -
for more than 5 seconds.
BUTTON
SETTING OF THE WATER SOFTENER CONSUMPTION
ROGRAMME
ROGRAMME
.
ATER HARDNESS LEVELS
/ O
» -
N
FF
BUTTON
» -
BUTTON
» -
changes the consumption setting by
BUTTON
ATER HARDNESS LEVELS
~
~
102
(s. chapter 3.2 V
).
repeatedly until the desired
/
WATER
IEW OF
/
WATER

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsp12-6e

Table of Contents