Pkm GSP12-6ES Instruction Manual page 87

H
1. Turn off the water supply completely (close water tap).
2. Decrease the water pressure by pressing the pressure reduction button to protect
you and the room from spilled water.
3. Finally remove the water supply hose from the tap.
2.6 Installation of the water drain hose
 The installation of the water and drain connection must be carried out by a
qualified professional.
 The appliance is equipped with a water supply and a water drain hose which can
be installed on the right or left
 Use brand-new hoses and connector kits only.
1. Insert the water drain hose (5) into a drainpipe (6) with a diameter of at least 40
mm or into a sink (s. below, installation A or installation B).
2. Do not bend or squeeze the water drain hose (5).
3. The free end of the water drain hose must not be higher than 1000 mm and
must not be immersed into water to avoid reflux (s. fig. below).
Depending on model
31
OW TO DISCONNECT THE WATER SUPPLY HOSE
to ensure proper installation.
31
H
OW TO CONNECT THE WATER DRAIN HOSE
~ ~
87