Table of Contents
Advertisement
Available languages
Available languages
1. Aluminium-made objects touched
the dishes.
2. The
items
resistant.
3. The lid of the water softener
container is not close properly.
4. You have not started a programme
after you added the water softener.
The remaining water softener is now
affecting the running programme.
W
ATER REMAINS ON THE BOTTOM OF THE APPLIANCE
1. Normal.
S
1. Extremely hard water.
2. Extremely low temperature of the
water supply.
3. The appliance is overfilled.
4. The dishes are placed improperly.
5. Old or wet detergent.
6. The rinse aid container is empty.
7. Improper detergent dosage.
a) Remove all metal-made objects.
b) Do not use a detergent.
c) Select the longest programme.
d) Start the programme. After 18 - 22 minutes the main-wash cycle begins.
e) Open the door pour 2 cups of white vinegar in the appliance (bottom).
f) Close the door and let the complete programme run. If these measures fail,
repeat the procedure but use
vinegar.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
are
not
corrosion
POTS AND FILM ON GLASSES AND CUTLERY
H
OW TO REMOVE SPOTS FROM GLASSWARE
¼
cup (60 ml) of citric acid crystals instead of the
1. Clean the marks with a mild abrasive
cleaner by hand.
2. Do not clean such items using the
appliance.
3. Close the lid properly.
4. Always start the rapid programme
without adding any tableware when
you have added some water softener.
1. A small amount of clean water
around the outlet keeps the water
seal functioning.
1. Check the water hardness.
2. Check the temperature of the water
supply.
3. Do not overfill the appliance.
4. Always place the dishes properly.
5. Always use proper detergent.
6. Refill the rinse aid container.
7. Dose the detergent properly.
~
~
135
.
.
.
Advertisement
Table of Contents
