Table of Contents
Advertisement
Available languages
Available languages
1. Press the « S
programme.
2. Press and hold the « P
current cleaning programme is cancelled and the appliance is in
3. Set the new cleaning programme using the « P
4. The programme indicator of the previously set cleaning programme goes off and
the programme indicator of the newly set cleaning programme goes on.
5. Press the « S
TART
6. The cleaning programme starts after approx. 10 seconds.
6.4 Subsequent addition of dishes
WARNING! While the appliance is operating it is dangerous to open
its door as hot water may spurt out. RISK OF SCALDING! RISK OF
BURNS!
You can put dishes later in the appliance unless the detergent container has
opened.
1. Press the « S
programme.
2. Wait 5 seconds before you open the door of the appliance.
3. Now you can add dishes.
4. Close the door of the dishwasher properly.
5. Press the « S
TART
programme.
6. The cleaning programme starts after approx. 10 seconds.
6.5 End of a cleaning programme
/ S
» -
TART
TOP
BUTTON
ROGRAMME
/ S
» -
TOP
BUTTON
/ S
» -
TART
TOP
BUTTON
/ S
» -
TOP
BUTTON
to interrupt the current cleaning
» -
for more than 3 seconds. The
BUTTON
ROGRAMME
to start the newly set cleaning programme.
to interrupt the current cleaning
again to continue the interrupted cleaning
~
~
123
STANDBY MODE
» -
.
BUTTON
.
Advertisement
Table of Contents
