9.1 Error codes
Error codes are indicated by the corresponding LED combinations of the
LEDs 1,2, 3,and 4 (s. fig. and table below).
E
RROR CODE
(LED
COMBINATION
LED 4
flickers slightly
LED 4 and LED 3
flicker slightly
LED 2
flickers slightly
LED 1, LED 2 and
LED 4 flicker slightly
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, remove
the water before restarting the dishwasher.
M
EANING
)
Long water inlet
time.
Required
temperature is not
reached.
Overflow / leakage
Communication
error between main
board and display
board.
~
136
P
OSSIBLE CAUSES
Tap is closed.
Water intake is restricted.
Water pressure is too low.
Malfunction of the heating
element
Please contact the aftersales
service.
An element of the appliance
leaks.
Please contact the aftersales
service.
Short circuit / cable breakage.
Please contact the aftersales
service.
~