Pkm GSP12-6ES Instruction Manual page 83

7. Connect the appliance to the mains properly.
8. The rating plate is inside the appliance or at the back.
2.2 Summary of the installation steps
1. Install the condensation strip properly (s. chapter 2.3 C
2. Install the water supply hose (s. chapter 2.5 I
(
HOSE COLD WATER
3. Install the water drain hose (s. chapter 2.6 I
).
HOSE
4. Connect the appliance to the mains (s. chapter 2.7 E
5. Install the appliance in the installation opening (s. chapter 2.9 I
THE APPLIANCE
6. Level the appliance properly (s. chapter 2.10 P
7. Install the front decoration panel (s. chapter 2.11 I
DECORATION PANEL
8. Adjust the door spring tension (s. chapter 2.12 A
SPRING TENSION
9. Fix the appliance in the installation opening (s. chapter 2.14 F
).
APPLIANCE
2.3 Condensation strip
I
1. Before installation: you must install the condensation strip
of the worktop to protect it from the water vapor released by the appliance. The
condensation strip deflects the water vapor from the worktop.
2. You will find the condensation strip inside your appliance.
3. Clean the bottom side of the worktop properly before you install the
condensation strip.
4. Remove the protective foil from the adhesive surface of the condensation strip.
5. Stick the condensation strip on the bottom side of the worktop.
6. The condensation strip must be flush with the edge of the work surface.
Depending on model.
26
Depending on model.
27
).
).
).
.
NSTALLATION OF THE CONDENSATION STRIP
(
DEPENDING ON MODEL
NSTALLATION OF THE WATER SUPPLY
NSTALLATION OF THE WATER DRAIN
LECTRICAL CONNECTION
ROPER LEVELLING
NSTALLATION OF THE FRONT
)
~ ~
83
ONDENSATION STRIP
NSTALLATION OF
).
DJUSTMENT OF THE DOOR
IXING OF THE
on the bottom side
26
27
).
.