Analyzer Messages - HP 64751 User Manual

914
Lab firmware auxiliary subsystem; product address: %s
Cause: This message should never occur. It shows that you have an unreleased
firmware version of the auxiliary subsystem.

Analyzer Messages

1105
Unable to delete label; used by emulation analyzer: <label>
Cause: This error occurs when you attempt to delete an emulation trace label
which is currently being used as a qualifier in the emulation trace specification or is
currently specified in the emulation trace format.
Action: You stop the trace or must change the trace command before you can
delete the label.
1108
Unable to redefine label; used by emulation analyzer: <label>
Cause: This error occurs when you attempt to redefine an emulation trace label
which is currently used as a qualifier in the emulation trace specification.
Action: You stop the trace or must change the trace command before you can
redefine the label.
1305 CMB execute; emulation trace started
Cause: This status message informs you that an emulation trace measurement has
started as a result of a CMB execute signal (as specified by the specify trace
command).
Chapter 12: Error Messages
Terminal Interface Messages
475