To Edit Files - HP 64751 User Manual

Chapter 6: Using the Emulator
Using System Commands

To edit files

• Choose File→Edit→File and use the dialog box to specify the file name.
• To edit a file based on an address in the entry buffer, place an address reference
(either absolute or symbolic) in the entry buffer; then, choose File→Edit→At ()
Location.
• To edit a file based on the current program counter, choose File→Edit→At PC
Location.
• To edit a file associated with a symbol when you are displaying symbols, position
the mouse pointer over the symbol, press and hold the select mouse button, and
choose Edit File At Symbol from the popup menu.
• To edit a file when displaying memory in mnemonic format, position the mouse
pointer over the line of source where you want to begin the edit, press and hold the
select mouse button, and choose Edit Source from the popup menu.
When editing files at addresses, the interface determines which source file contains
the code generated for the address and opens an edit session on the file. The
interface will issue an error if it cannot find a source file for the address.
The interface will choose the "vi" editor as its default editor, unless you specify
another editor by setting an X resource. Refer to the "Setting X Resources" chapter
for more information about setting this resource.
You must load symbols before most commands will work because symbol
information is needed to be able to locate the files.
212