Table of Contents
Advertisement
Chapter 6: Using the Emulator
Changing the Interface Settings
Source/Symbols View
Source in Memory specifies whether source lines are included, mixed with
assembly code, or excluded from mnemonic memory displays.
Source in Trace specifies whether source lines are included, mixed with stored
states, or excluded from trace displays.
Symbolic Addresses specifies whether symbols are included in displays.
Tab Expansion sets the number of spaces displayed for tabs in source lines.
Source/Symbols View
Label Field sets the width (in characters) of the address field in the trace list or
label (symbols) field in any of the other displays.
Mnemonic Field sets the width (in characters) of the mnemonic field in memory
mnemonic, trace list, and register step mnemonic displays. It also changes the
width of the status field in the trace list.
Symbols in Mnemonic Field sets the maximum width of symbols in the mnemonic
field of the trace list, memory mnemonic, and register step mnemonic displays.
Source Lines sets the width (in characters) of the source lines in the memory
mnemonic display.
Auto Update
Memory Displays toggles whether memory displays are automatically updated
after commands that change memory contents or whether you must enter memory
display commands to update the display. You may wish to turn off memory
display updates, for example, when displaying memory mapped I/O.
Trace Displays toggles whether trace displays are automatically updated when
trace measurements complete or whether you must enter trace display commands to
update the display. You may wish to turn off trace display updates in one
emulator/analyzer window in order to compare the display with a new trace display
in another emulator/analyzer window.
208
Advertisement
Table of Contents
