Table of Contents
Advertisement
Chapter 11: Emulator/Analyzer Interface Commands
set
off
This option prevents inclusion of source lines in the trace and memory mnemonic
display lists.
on
This option displays source program lines preceding actual processor instructions
with which they correlate. This enables you to correlate processor instructions with
your source program code. The option works for both the trace list and memory
mnemonic displays.
only
This option displays only source lines. Processor instructions are only displayed in
memory mnemonic if no source lines correspond to the instructions. Processor
instructions are never displayed in the trace list.
symbols
off
This prevents symbol display.
on
This displays symbols. This option works for the trace list, memory, software
breakpoints, and register step mnemonics.
high
Displays only high level symbols, such as those available from a compiler. See the
Symbolic Retrieval Utilities User's Guide for a detailed discussion of symbols.
low
Displays only low level symbols, such as those generated internally by a compiler,
or an assembly symbol.
all
Displays all symbols.
tabs_are
This option allows you to define the number of spaces inserted for tab characters in
the source listing.
<TABS>
Prompts you for the number of spaces to use in replacing the tab character. Values
in the range of 2 through 15 may be entered.
update
When using multiple windows or terminals, and specifying this option, the display
buffer in that window or terminal will be updated when a new measurement
completes. This is the default. Note that for displays that show memory contents,
the values will be updated when a command executes that changes memory
contents (such as modify memory, load, and so on).
<VALUE>
Specifies the logical value to which a particular UNIX environment variable is to
be set.
width
402
Advertisement
Table of Contents
