To Display Memory Repetitively; To Modify Memory - HP 64751 User Manual

To display memory repetitively

• Choose Display→Memory→Repetitively.
• Using the command line, enter the display memory repetitively command.
The memory display is constantly updated. The format is specified by the last
memory display command.
This command is ignored if the last memory display command was a mnemonic
display.

To modify memory

• Choose Modify→Memory and complete the command using the command line.
• To modify memory at a particular address, place an absolute or symbolic address in
the entry buffer; then, choose Modify→Memory at () and complete the command
using the command line.
• Using the command line, enter the modify memory command.
You can modify the contents of one memory location or a range of memory
locations. Options allow you to modify memory in byte, short, word, and real
number formats.
Chapter 6: Using the Emulator
Displaying and Modifying Memory
203