HP 64751 User Manual page 145

To run from reset:
run from reset <RETURN>
To display the trace:
display trace <RETURN>
Notice the supervisor stack pointer and program counter values that were loaded at
80000H and 80004H are fetched from memory locations 0 through 7 and the
program begins running at 81000H.
Suppose your boot ROM is at a higher address:
To map the boot ROM address range in emulation memory, access the
configuration questions, and answer the questions as shown below.
Modify memory configuration? yes
Entering the following mapper commands. Specify unmapped ranges as guarded
memory to show that the fetches of the supervisor stack pointer and program
counter values after reset really come from the boot ROM address range.
0ff000000h thru 0ff00ffffh emulation rom cs0 <RETURN>
default guarded <RETURN>
Configuration file name? boot_cfg
Chapter 5: Configuring the Emulator
Mapping Memory
145