To Turn Off The Restriction To Real-Time Runs - HP 64751 User Manual

•
If you want to enter one of these commands, you must first make an explicit break
into the monitor using the break command.
CAUTION Target system damage could occur! If your target system circuitry is dependent
on constant execution of program code, be aware that the following commands still
cause breaks from running programs even when you have restricted the emulator to
real-time runs:
•
•
•
•
Use caution in executing these commands.

To turn OFF the restriction to real-time runs

• Answer "no" to the "Restrict to real-time runs?" question.
Temporary breaks to the monitor while running programs are allowed, and the
emulator accepts commands normally.
dual-port emulation memory is reserved for foreground monitor programs
when they are used.
Synchronize SIM registers.
reset
run
break
step
Chapter 5: Configuring the Emulator
Modifying the General Configuration Items
121