How Popup Menus Map To The Command Line - HP 64751 User Manual

Chapter 11: Emulator/Analyzer Interface Commands
Pulldown
Settings→Source/Symbol Modes→Absolute
Settings→Source/Symbol Modes→Symbols
Settings→Source/Symbol Modes→Source
Mixed
Settings→Source/Symbol Modes→Source
Only
Settings→Display Modes→Source Only
Settings→Pod Command Keyboard
Settings→Simulated IO Keyboard
Settings→Command Line

How Popup Menus Map to the Command Line

The following tables show the items available in the popup menus and the
command line commands to which they map.
Mnemonic Memory Display Popup
Set/Clear Breakpoint
Edit Source
Run Until
Trace After
Trace Before
Trace About
Trace Until
Breakpoints Display Popup
Set/Inactivate Breakpoint
Clear (delete) Breakpoint
Enable/Disable Software Breakpoints
Set All Breakpoints
Clear (delete) All Breakpoints
336
Command Line
set source off symbols off
set source off symbols on
set source on inverse_video on symbols on
set source only inverse_video off symbols on
set
display pod_command; pod_command keyboard
display simulated_io; modify keyboard_to_simio
N/A (toggles the command line)
Command Line
modify software_breakpoints set/clear --EXPR--
! vi +<line> <file> ! no_prompt_before_exit
run until --EXPR--
trace after STATE
trace before STATE
trace about STATE
trace before STATE break_on_trigger
Command Line
modify software_breakpoints set/deactivate --EXPR--
modify software_breakpoints clear --EXPR--
modify software_breakpoints enable/disable
modify software_breakpoints set
modify software_breakpoints clear