Table of Contents
Advertisement
6.11
REMOVING AND RE-FITTING THE GLASS PANEL
6.11.1
Remove the top glass retaining cover from the product. It is secured via
the two screws as indicated, see figure 22 below.
Fig. 22
2 off securing
screws
6.11.2
Remove the left and right hand side glass securing brackets from the
product. They are secured via 3 off screws each side. Support the
glass panel to prevent it falling forwards when the side trims are
removed. See figure 23 below.
Fig. 23
3 off securing
screws L/H/S
71
3 off securing
screw R/H/S
Advertisement
Table of Contents
