Updatesub_V2500() - Polycom ReadiVoice Reference Manual

UpdateSub_v2500()

Parameters
Parameter
vSubscriberId
vBillingType
vBillingPhone
vBillingAddress
vBillingId
vCreditCardType
vCreditCardNumber
Proprietary & Confidential
Stored procedure for updating a subscriber's record in the database.
This procedure is similar to UpdateSub_v2320(), but has two additional
parameters:
The vWROption parameter specifies the Waiting Room (conference lock
•
type) setting for the subscriber's conferences:
— Normal lock: The Waiting Room isn't available; when the subscriber
locks a conference, callers are turned away.
— Lock with WR: The Waiting Room is available; when the subscriber
locks a conference, callers wait to be admitted by the subscriber.
— WR on Entry: Conferences start out locked with the Waiting Room
available. All callers must wait to be admitted by the subscriber.
The vWROptionEnable parameter specifies whether the subscriber can
•
change the Waiting Room setting for future conferences.
Specify all parameters. The constraints column shows specific value or range
constraints. For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
INT >0
SMALLINT 0, 1
CHAR (30)
CHAR (255)
INT <0, >0
SMALLINT 0–3
CHAR (20)
on page 4.
Description
ID of subscriber to update.
Type of billing. 0: Credit card; 1: Phone
number. Set to 0 if not updating billing
information.
Phone number to bill or empty string if not
updating billing information.
Billing address or empty string if not updating
billing information.
Existing billing ID (from database) if updating
billing information. Negative number if not
updating billing information.
Type of credit card. 0: Visa; 1: MC; 2: Amex;
3: Discover. Set to 0 if not if not updating billing
information.
Credit card number (numeric characters only)
or empty string if not updating billing
information.
Current PSPI Functions
75