Getsub_V2130() - Polycom ReadiVoice Reference Manual

GetSub_v2130()

Parameters
Note:
Parameter
vSubscriberId
Return Values
Proprietary & Confidential
Stored procedure for retrieving a subscriber's record from the database.
This procedure is similar to GetSub_v2100(), but has three additional return
values:
• The conference entry with participant count (PartPlayCount) flag, added
in GetSub_v2110(). If it's set to 1, participants entering a conference hear
a message telling them the number of people (including themselves) in
conference.
• The Dial-Out Prefix parameter specifies a number to be dialed before the
telephone number when dialing out.
• The Dial-Out Postfix parameter specifies a number to be dialed after the
telephone number when dialing out.
The prefix and postfix parameters accommodate the Dial-Out Billing (UDO)
configuration, described in the ReadiVoice Administration & Maintenance Guide.
The constraints column shows specific value or range constraints. For
syntax rules and constraints applicable to all parameters, see
Stored Procedures" on page 4.
Data Type Constraints
INT >0
Data Type
INT
INT
INT
SMALLINT
CHAR (30)
CHAR (255)
SMALLINT
Legacy v. 2.13.0/2.30.0 PSPI Functions
Description
ID of subscriber. Must be in database.
Description
Return code (0: OK; otherwise, error code).
Subscriber ID.
Billing ID.
Billing type. 0: Credit card; 1: Phone number.
Billing phone number.
Billing address.
Credit card type. 0: Visa; 1: MC; 2: Amex;
3: Discover.
"Calling
159