Addsub_V2130() - Polycom ReadiVoice Reference Manual

AddSub_v2130()

Parameters
Proprietary & Confidential
Stored procedure for adding a subscriber to the database.
The access phone number specified for the new subscriber must already exist
in the database. To add a new subscriber and a new access number at the same
time, use AddSubAndAN_v2130().
This procedure is similar to AddSub_v2100(), but has three additional
parameters:
The vPartPlayCount flag, added in AddSubAndAN_v2110(). If it's set to 1,
•
participants entering a conference hear a message telling them the number
of people (including themselves) in conference.
• The vDialoutPrefix parameter specifies a number to be dialed before the
telephone number when dialing out.
The vDialoutPostFix parameter specifies a number to be dialed after the
•
telephone number when dialing out.
The prefix and postfix parameters accommodate the Dial-Out Billing (UDO)
configuration, described in the ReadiVoice Administration & Maintenance Guide.
Specify all parameters. The constraints column shows specific value or range
constraints. Note that the vExternalId parameter must have a data type of
CHAR(30). For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Legacy v. 2.13.0/2.30.0 PSPI Functions
on page 4.
139