Addsubacm(); Addsub_V2000() - Polycom ReadiVoice Reference Manual

ReadiVoice PSPI Reference

AddSubAcm()

Parameters
Parameter
vSubId
vAcmId
Return Values

AddSub_v2000()

Parameters
Note:
234
Stored procedure for adding an Application Control Mode (ACM) option to a
subscriber. Compatible with v. 2.00.0 or later of the software if ACM is
installed and configured.
Specify all parameters. The constraints column shows specific value or range
constraints. For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
INT >0
INT >0
Data Type
INT
Stored procedure for adding a subscriber to the database.
This procedure differs significantly from previous versions. Prior to v. 2.00.0,
you couldn't specify an access number for a new subscriber; the system chose
one. In this function, you specify the access number desired with the
AccessNumber parameter (required). Consequently, the AccessNumType and
NumberClassId parameters used in
and have been removed.
Specify all parameters. The constraints column shows specific value or
range constraints. Note that the vExternalId parameter must have a
data type of CHAR(30). For syntax rules and constraints applicable to all
parameters, see "Calling Stored Procedures"
on page 4.
Description
ID of subscriber; must be in subscriberinfo
table.
ID of ACM option; must be in acmoptions table.
Description
Return code (0: OK; otherwise, error code).
AddSub_v1300()
on page 4.
are no longer necessary
Proprietary & Confidential