Getsub_V2500() - Polycom ReadiVoice Reference Manual

ReadiVoice PSPI Reference

GetSub_v2500()

Parameters
Parameter
vSubscriberId
Return Values
60
Stored procedure for retrieving a subscriber's record from the database using
the subscriber ID. To retrieve a subscriber's record using the subscriber's
external ID, use GetSubByEId_v2500(). Both procedures return the same set
of data.
This procedure is similar to GetSub_v2320(), but has two additional return
values at the end of the record:
• The WR Option parameter specifies the Waiting Room setting for this
subscriber's conferences:
— Normal lock: The Waiting Room isn't available; when the subscriber
locks a conference, callers are turned away.
— Lock with WR: The Waiting Room is available; when the subscriber
locks a conference, callers wait to be admitted by the subscriber.
— WR on Entry: Conferences start out locked with the Waiting Room
available. All callers must wait to be admitted by the subscriber.
• The WR Option Enable flag specifies whether the subscriber can change
the Waiting Room setting for future conferences.
The constraints column shows specific value or range constraints. For syntax
rules and constraints applicable to all parameters, see
Procedures" on page 4.
Data Type Constraints
INT >0
Data Type
INT
INT
INT
SMALLINT
CHAR (30)
CHAR (255)
"Calling Stored
Description
ID of subscriber. Must be in database.
Description
Return code (0: OK; otherwise, error code).
Subscriber ID.
Billing ID.
Billing type. 0: Credit card; 1: Phone number.
Billing phone number.
Billing address.
Proprietary & Confidential