Reassignacccode() - Polycom ReadiVoice Reference Manual

ReAssignAccCode()

Parameters
Parameter
LocalSubId
LocalNewAccCode
Return Values
Proprietary & Confidential
Stored procedure for changing the access code assigned to a subscriber.
Compatible with v. 1.30.0 or later of the software. Note that, with v. 2.10.0, the
system configuration setting for code length changed from a maximum value
constraint to a minimum.
Specify all parameters. The constraints column shows specific value or range
constraints. For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
INT >0
CHAR (20)
Data Type
INT
on page 4.
Description
ID of subscriber. Must be in database.
New access code. Can't be empty string. Must
be at least AccessCodeLength characters (set
in SysConfig table).
Description
Return code (0: OK; otherwise, error code).
Legacy v. 2.10.0 PSPI Functions
221