Addgroupacm() - Polycom ReadiVoice Reference Manual

ReadiVoice PSPI Reference

AddGroupAcm()

Parameters
Parameter
vGroupId
vAcmId
Return Values
128
Stored procedure for adding an Application Control Mode (ACM) option to a
subscriber group. Compatible with v. 2.00.0 or later of the software if ACM is
installed and configured.
Specify all parameters. The constraints column shows specific value or range
constraints. For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
INT >0
INT >0
Data Type
INT
on page 4.
Description
ID of subscriber group; must be in groupdetail
table.
ID of ACM option; must be in acmoptions table.
Description
Return code (0: OK; otherwise, error code).
Proprietary & Confidential