Deletesub_V2320() - Polycom ReadiVoice Reference Manual

DeleteSub_v2320()

Caution!
Parameters
Parameter
vSubscriberId
vAccessNum
vAccessCode
vDeletePhoneNum
Proprietary & Confidential
Stored procedure for changing a subscriber's account status to 2 (deleted). You
can run a purge script to periodically remove deleted accounts from the
database.
Identify the subscriber by one of the following:
• The subscriber ID.
• The access phone number alone, if it's private.
• The access phone number and access code, if the access number is shared.
If you set DeletePhoneNum to 1, and if the access phone number isn't being
used by any other subscribers, it's removed from the database.
The SPC puts the new data into the CacsEventUpdate table in the database; the
CACS then updates the call router with the data from the temporary table
every ten seconds.
The CacsEventUpdate table must be purged periodically using the
cleanCacsEvtUpdate.pl script, as described in the ReadiVoice Administration &
Maintenance Guide.
Specify all parameters. The constraints column shows specific value or range
constraints. For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
INT 0, >0
CHAR (60)
CHAR (20)
SMALLINT 0, 1
on page 4.
Description
ID of subscriber. Set to 0 if not querying by
subscriber ID. Otherwise, must be in database.
Access phone number of subscriber (numeric
characters only). Set to empty string if not
querying by access number.
Access code of subscriber (numeric characters
only). Set to empty string if not querying by
access number or if access number is private
(no access code).
Delete access phone number from
phonenumbers table. 0: No; 1: Yes
Current PSPI Functions
39