Addsubandan_V2110() - Polycom ReadiVoice Reference Manual

ReadiVoice PSPI Reference
Return Values

AddSubAndAN_v2110()

Parameters
Parameter
AccessNumVerify
NotifyCallRouter
vEntryDate
vActivationDate
vBillingId
vBillingType
182
Data Type
INT
INT
Stored procedure for adding a new subscriber and new access number(s) to the
database at the same time.
For a description, refer to AddSubAndAccNum(), which is very similar. This
procedure adds one new parameter: the vPartPlayCount flag. If it's set to 1,
participants entering a conference hear a message telling them the number of
people (including themselves) in conference.
Specify all parameters. The constraints column shows specific value or range
constraints. Note that the vExternalId parameter must have a data type of
CHAR(30). For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
SMALLINT 0, 1
SMALLINT 0, 1
DATETIME
YEAR TO
MINUTE
DATETIME
YEAR TO
MINUTE
INT -1, >0
SMALLINT 0, 1
Description
Return code (0: OK; otherwise, error code).
Subscriber ID of new subscriber (if no error).
on page 4.
Description
Validate access number integrity.
0: No; 1: Yes.
Parameter remains only to maintain backward
compatibility. Regardless of setting, the SPC puts
new data into the CacsEventUpdate table. See
caution above about maintaining this table.
Time of creation.
Time of activation.
Existing billing ID (from database) or -1 to let
system generate a new billing ID.
Type of billing. 0: Credit card; 1: Phone
number.
Proprietary & Confidential