Polycom ReadiVoice Reference Manual page 313

Defines and Return Codes
PSPI Return Codes
Proprietary & Confidential
This appendix documents the return (error) codes returned by PSPI functions
and the database length defines used by PSPI function parameters.
All stored procedure calls (SPCs) pass back a return (error) code in the first
return value. The table below lists the possible return codes.
In addition to the return codes listed here, SPCs may return SQL error codes,
which are negative numbers. Consult your Informix documentation for
descriptions of these.
Return Code Description
OK (no error).
0
End of list reached or record not found.
100
The default subscriber group isn't in the database.
101
The specified subscriber group isn't in the database.
102
No prompt sets exist in the database.
110
The specified prompt set isn't in the database.
111
Invalid DialOut. Must be one of the following:
120
0: Dial out not allowed
1: Dial out allowed
Invalid NameRecord. Must be one of the following:
130
0: NameRecord off
1: NameRecord on
A
305