Getgroupacm() - Polycom ReadiVoice Reference Manual

ReadiVoice PSPI Reference

GetGroupAcm()

Parameters
Parameter
vGroupId
Return Values
44
Stored procedure for retrieving a list of the Application Control Mode (ACM)
options enabled for a subscriber group. A return code of 100 flags the end of
the list of ACM options. Compatible with v. 2.00.0 or later of the software if
ACM is installed and configured.
Specify all parameters. The constraints column shows specific value or range
constraints. For syntax rules and constraints applicable to all parameters, see
"Calling Stored Procedures"
Data Type Constraints
INT >0
Data Type
INT
INT
on page 4.
Description
ID of subscriber group. Must be in database.
Description
Return code (0: OK; 100: end of list; otherwise,
error code).
ID of ACM option.
Proprietary & Confidential