Adding A Telephone Call To A Video Call - Polycom ViewStation EX Getting Started Manual

G S G
ETTING TARTED UIDE FOR
10
V S EX, FX,
IEW TATION AND
Using Your System as a Telephone
In addition to using your system to place video calls, you can use it to
make ordinary telephone calls.
To place a telephone call from your system:
1. Select Call Type > Telephone from the main screen.
2. Enter the number you want to call.
• To place a call within your PBX system, enter the last
four digits of the number.
• To delete a digit, press
control.
On remote controls that do not have a Delete button,
press
• To delete an entire phone number, select Clear on the
screen.
3. Press

Adding a Telephone Call to a Video Call

If you are already in a video conference, you can add an audio
participant to your video call.
Adding a telephone call to a video call is only supported if you have enabled
three-way calling from your local telephone company.
To add a telephone call after your video call is connected:
1. Press
2. Select Add Telephone from the Call Hang-up Choices screen.
3. Use the number buttons on the remote control to enter the
telephone number of the audio participant that you want to add
to your video conference.
The system calls the audio participant.
4. After the audio call connects, press
the video conference.
VS4000
Left.
Call Hang Up to place the call.
Call Hang Up.
Delete on the remote
Near or Far to return to
. . /
WWW POLYCOM COM VIDEODOCUMENTATION