Beko B5DT59442W User Manual page 7

call to take the necessary
steps. These operations are
the responsibility of the
customer.
• Inspect the product for
damage before installing. Do
not install the device if it is
damaged.
• Injuries may occur if hands
are placed on the uncovered
slots. Close the openings of
the transport safety bolts
with plastic plugs.
• You must not install or leave
the product in locations where
it may be exposed to external
environmental conditions.
• Do not install the product in
environments where the
temperature can drop below 0ºC.
• Do not place the product on a
carpet or similar surface. This
can be a fire hazard as there is
no air circulation at the
bottom.
• Place the product on a flat and
firm surface and balance it
with the adjustable feet.
• Connect the product to a
grounded socket protected
with a fuse according to the
current values stated on the
rating plate. Make sure that
the grounding is
performed by an expert
electrician. Do not operate the
product without proper
grounding in accordance with
regional / national regulations.
• Plug the product into a socket
with suitable voltage and
frequency ratings as stated on
the rating plate.
• Do not plug the product into
loose, broken, dirty or greasy
sockets or sockets that have
come out of their seats with a
risk of contact with water.
• Use the new tubing set
supplied with the product. Do
not reuse old hose sets. Do not
add any additives to the hoses.
• Connect the water inlet hose
directly to the water tap. The
pressure of the tap must be at
least 0.1 MPa (1 bar) and
maximum 1MPa (10 bars). 10
to 80 liters of water must flow
from the tap in one minute for
the product to function
correctly. If the water
pressure exceeds 1 MPa (10
Bar), a pressure reducing
valve must be fitted. The
maximum allowed
temperature is 25°C.
NL / 7