Setting Up A Washing Machine That; Is Connected To Someone Else's - Beko B5DT59442W User Manual

Your washing machine will
automatically switch off if you
cannot perform the configuration
within 5 minutes. In this case, you
have to start the configuration
process all over again. If the
problem persists, contact the
authorized service.
You can use your washing machine
with more than one smart device.
To do this, you must also download
the HomeWhiz app on the other
smart device. After launching the
app, you must log in with the
account you previously created and
linked to your washing machine.
Otherwise, you need to read
"Setting up a washing machine
connected to someone else's
account".
You need an internet connection on
your smart device to continue with the
HomeWhiz configuration. Otherwise you
will not be able to complete the
configuration of the HomeWhiz app. If
you experience problems with your
internet connection, please contact your
internet provider.
The HomeWhiz app may require
you to enter the product number
found on the product label. This
product label is affixed to the door
of the appliance. The product
number is stated on this label.
6.20.2 Set up a washing machine
connected to the account
someone else's
If the washing machine you want to use
was previously registered in the system
with someone else's account, you must first
create a new connection between your
HomeWhiz application and the appliance.
1. Download the HomeWhiz app on the new
smart device you want to use.
2. Create a new account and log in to this
account on the HomeWhiz app.
3. Follow the steps in the HomeWhiz Setup
and continue with the configuration.
Since the HomeWhiz function and
the remote control function on your
device are only controlled by the
pairing via a bluetooth technology,
it can only be controlled by a single
Homewhiz app at a time.
NL/45